PTI Technologies' most advanced media is Glas Tech II which is a composite five layer construction and utilizes epoxy impregnated fiberglass to provide high efficiency, low pressure drop and increased dirt holding capacity. Nylon support media maintains the integrity of the fiberglass media in service. The epoxy coated wire mesh adds strength to the element, insuring pleat spacing under variable pressure/flow conditions and guards against element fatigue failures.
The F2P series is rated for 6000 psi continuous service and for flows to 150 gpm. Valve options include bypass, non-bypass and reverse flow valve for bi-directional systems. Port sizes from 3/4" to 1 1/2" are available in SAE straight thread and 3000 or 6000 psi SAE 4-bolt flange styles.
The F1L series is an economical 2000 psi, 25 gpm pressure filter constructed of light weight aluminum heads and steel bowls. Standard features include bypass, 1" SAE straight thread ports, visual or electrical P devices and is available with Glas-Tech Il or Micronic elements.
The FBG series has been used successfully in low pressure return-line applications for years. Primary applications have been compressors and ground support equipment.
The F8G series is rated for flows to 300 gpm and pressures to 400 psi. The design of this series provides quick element change capabilities, 25 or 50 psid bypass valve options - Glas Tech II elements with 3, 6, 12 or 2 3 micrometre removal ratings where Bx =>200 plus water removal elements - visual and/or electrical P options.
The F1F series is constructed of lightweight aluminum, rated for 350 psi service and flows to 50 gpm. The threaded head-to-bowl connections makes element servicing quick and easy. The F1F series is available with SAE straight thread ports, bypass and visual or visual/electrical P devices.
The F7F/F7L duplex assemblies, with integral transfer valve, are designed to provide continuous filtration for those critical applications where system operation cannot be interrupted, even for element change-out. These duplex filters are rated for 350 and 2400 psi service, flows to 100 gpm and have 1 1/2" SAE straight thread or 3000 psi 4-bolt flange port styles.
The F7G series duplex assemblies, with integral transfer value, were designed to provide continuous filtration for those critical applications where system operation cannot be interrupted - even for element replacement.
The F5D intank series is constructed of light weight aluminum heads with steel bowls and is ideally suited for applications where space is critical.
Spin-ons - Return/Suction
The PTI Technologies spin-on series are rated for flows to 120 gpm. Elements are interchangeable with most competitive spin-ons. Water removal elements for hydraulic and fuel fluids are also available. The F4S Suction Spin-on is available with 40(u) fiberglass and 149(u) wire mesh medias. A 3 psid bypass is standard.
Out standing performance with EPA compliance.
Ebbco's D.I. Resin Vessel effectively produces high quality dielectric water, while collecting and holding dissolved solids for safe disposal.